What Kinds Of Wear Resistant Ceramic Pipes Are There

1. Centrifugal casting composite ceramic pipe

Centrifugal casting composite ceramic pipe is a kind of composite pipe made by "self propagating high temperature synthesis high speed centrifugal technology", which forms uniform, dense and smooth ceramic layer and transition layer at high temperature and high speed.

2. Chip wear resistant ceramic pipe

The chip wear-resistant ceramic pipe is pasted on the inner wall of the pipe with high-temperature strong adhesive, which forms a firm anti-wear layer after heating and curing. The production process is simple and the cost is high,. Generally, the service temperature should not exceed 100 ℃, which is not suitable for pipes.

3. Spot welding cartridge type wear resistant ceramic pipe

Spot welding cartridge type wear-resistant ceramic pipe is to use high-temperature strong adhesive to paste the alumina ceramic piece with hole in the middle on the inner wall of the pipe, and at the same time cooperate with spot welding process to weld the ceramic firmly on the inner wall of the pipe through the small hole. To protect the solder joint, screw on the ceramic cap. Each tile is not only pressed and inserted into each other, but also forms a trapezoidal angle, which makes the tiles closely connected and seamless; When the last piece of a circle is closely embedded, a 360 degree gap is formed between the porcelain pieces ° Mechanical self-locking force (this technique was used in Chinese Bridge Construction Engineering several centuries ago). The production process of the product is relatively complex, the production cycle is long, and the cost is high.

4. Integrated wear resistant ceramic pipe

Integrated molding is the ceramic pipe is fired as a whole, and then poured into the steel pipe with special filler. The pipeline has smooth inner wall, good sealing performance, good wear resistance and corrosion resistance.